How to properly clean hardwood floors

How hardwood floors are properly cleaned

Hardwood floors are one of the best investments an owner can make to improve the value of his home. There is currently a strong demand for wood floors in the market. If not taken care of properly, wooden floors can reduce the value of a house. Most owners choose hardwood for its durability and warm charm. They can be easily added to any room. Hardwood styles never go out of style and can save you money in the coming years. Carved floors generally lose their appeal and often need to be replaced every few years.

If you are cleaning the wood floors with a beautiful appearance, it is a problem if it is not cleaned properly. By using the wrong type of cleaner as one that contains sharp chemicals, the appearance of the wood can be destroyed and the homeowner can make a great effort to restore it. Many methods are used to clean wood floors. The first is steam cleaning, other than cleaning. Some scrub remains may leave the floor behind. The process uses steam cleaning, which easily removes dirt. Floors dry quickly and there is no need to sweep and clean the area. Nor is it concerned that family members or pets must be returned to sliding and collapsing floors.

The best steam cleaner uses a process called instant heating. It is like a tankless water heater and allows water to heat quickly. Tap water can be used. Most domestic water systems can be used unless it is a hard water system. If so, distilled water should be used. It is important to ensure that floors are free of dust and sand before starting the process. Floors can be scraped off by washing dust and dust. If a cleaning solution is added, make sure it is neutral with an average ph. Seal the area before using it and do not use floor scrubbing in places, this will cause heating if water enters the wood.

Things to remember when cleaning hardwoord floors

Before cleaning wood floors, you need to know what type of finish you put on the floors. New floors are sealed today with urethane, polyacrylic or polyurethane.

The floors are sealed with surface and water and water-resistant and are easy to care for. Just sweep and mop and your floor is clean. Therefore, they should be protected with liquid wax or adhesive wax. Varnished, lacquered and untreated floors are not as resistant to water spills, moisture and are treated as other sealants.

Try these floors as you would deal with oiled floors. If you are not sure what type of floor you have, you can tear your fingers around the floor. If there are no spots, then a floor surface appears on your floor. If a stain appears, the floor was treated with a penetration seal, oil finish, shellac, varnish or lacquer and then enclosed. Do not use oils, waxes or furniture sprays on your floor. The slippery surface will leave traces of oil and lead to furniture sprinklers.

The wax takes time to apply and makes it difficult to protect. Direct ammonia, alkaline products or abrasive cleaners will be used without problems or scratches. Floor refineries will recommend safe products for use, but sometimes these products are hard to find and can be expensive. Murphy’s oil soap can be used as a soap dish with water. Do not mop with water alone, as this will bring dirty floors to light and will not remove dirt and grip.

High traffic areas should be swept daily and fed twice a week. Low traffic areas can be turned off once a month or change the seasons. Always use a damp mop that is not soaked, as this will damage wood floors.

Leave a Reply

Your email address will not be published. Required fields are marked *